Waiting for the end of generator ramping
SuperNova device write OK: kV=50.00,mA=0.80,ON
RAMP: SuperNova device unlock OK (Wed Aug 21 11:45:43 2019)
ODBENCH SUPERN INFO: Close client (others active)
RAMP: SuperNova device connection shutdown OK. GUI is still active. (Wed Aug 21 11:45:43 2019)
DC3DEVICES: CCSCAM  (Ver. 2.1.14.208)  device OK (no locking)
Waiting for the end of dark current map acquisition
DC INFO: SuperN settings  50.00kV   0.80mA at Wed Aug 21 11:45:44 2019
CCD INFO: Dark C:\Xcalibur\CrysalisPro171.39.29c\oxford_darkimages\dc_dark_2048_2048_4_4_5000.dar written at Wed Aug 21 11:45:45 2019
Camera settings: 
CCD
   chip name  "KAF-4320E"
   channels 4
   height 2088
   width 2096
   active area     height 2088
     width 2096
     x 0
     y 0
HW
   ang brd pressent 1
   ang config loaded
   dsp firmware ok 1
   fpga firmware ok 1
   temperature ready 1
   ang brd type 1
MISC
   expander 221
   free space 206172
PICTURE
   param
     autoupload 1
     correction raw
     format raw
     ref type median
     analog channel 1
     binning 2
     originx 18
     originy 18
   state ref0 1490
   state ref1 1077
   state ref2 1194
   state ref3 1410
VOLTAGES
   dac_ref1 75 mV
   dac_ref2 94 mV
   dac_ref3 100 mV
   dac_ref4 87 mV
   h1 amplitude 10000 mV
   h1 offset 0 mV
   h1l amplitude 10000 mV
   h1l amplitude -3000 mV
   h2 amplitude 10000 mV
   h2 offset -3000 mV
   reset amplitude 12000 mV
   reset offset 2000 mV
   v1 amplitude 8000 mV
   v1 offset -8000 mV
   v2 amplitude 8000 mV
   v2 offset -8000 mV
TIMINGS 1X1
   adc sample delay -80 ns
   adc sample width 40 ns
   amp time off 4000 ms
   amp time on 3000 ms
   h setup time 50000 ns
   h first 60 ns
   h last 0 ns
   h width 600 ns
   reset delay 0 ns
   reset width 80 ns
   sh delay -280 ns
   sh width 220 ns
   v1 middle width 40000 ns
   v1 negative width 40000 ns
   v1 positive width 40000 ns
   v2 delay 40000 ns
   v2 negative width 40000 ns
   v2 pulse width 40000 ns
TIMINGS 2X2
   adc sample delay -80 ns
   adc sample width 40 ns
   amp time off 4000 ms
   amp time on 3000 ms
   h setup time 50000 ns
   h first 320 ns
   h last 220 ns
   h width 180 ns
   reset delay 0 ns
   reset width 80 ns
   sh delay -280 ns
   sh width 220 ns
   v1 middle width 40000 ns
   v1 negative width 40000 ns
   v1 positive width 40000 ns
   v2 delay 40000 ns
   v2 negative width 40000 ns
   v2 pulse width 40000 ns
TIMINGS 4X4
   adc sample delay -80 ns
   adc sample width 40 ns
   amp time off 4000 ms
   amp time on 3000 ms
   h setup time 50000 ns
   h first 300 ns
   h last 220 ns
   h width 180 ns
   reset delay 0 ns
   reset width 80 ns
   sh delay -280 ns
   sh width 220 ns
   v1 middle width 40000 ns
   v1 negative width 40000 ns
   v1 positive width 40000 ns
   v2 delay 40000 ns
   v2 negative width 40000 ns
   v2 pulse width 40000 ns
System uptime: 9w 5d 1h 11m 3s

Network connection information (Wed Aug 21 11:45:45 2019)
Connected to ROOT\CIMV2 WMI namespace
DC3DEVICES: Dualchiller  (Ver. 2.5.3.34 - Final_Rev772_PCB7)  device OK (no locking)
Adapter : Intel(R) PRO/1000 PL Network Connection
  Speed:     100000000
  MaxSpeed:  100000000
  MACAddress:00:D0:C9:C4:15:16
  Status:    00:D0:C9:C4:15:16
Adapter : Intel(R) 82566DM-2 Gigabit Network Connection
  Speed:     100000000
  MaxSpeed:  100000000
  MACAddress:00:D0:C9:C4:15:15
  Status:    00:D0:C9:C4:15:15
Adapter : Intel(R) PRO/1000 GT Desktop Adapter
  Speed:     1000000000
  MaxSpeed:  1000000000
  MACAddress:90:E2:BA:06:D2:84
  Status:    90:E2:BA:06:D2:84
EXPECTED FINISH TIME:  (0,15,end:Wed Aug 21 11:49:22 2019)
System uptime: 9w 5d 1h 11m 3s
Going to 28.000000 -24.304290 70.000000 0.000000 53.000000
Run 1 started at Wed Aug 21 11:45:46 2019
Experiment: D:\Data\xs2212a\pre_xs2212a
Omega scan:   28.000 to   33.000 (    5 frames,   5.000s,   1.000deg) at t: -24.304,k:  70.000,p:   0.000,dd:  53.000
DC INFO: Cryojet settings 250.0K 29.400% 14.100% at Wed Aug 21 11:45:49 2019
Run 1 ended

EXPECTED FINISH TIME:  (5,15,end:Wed Aug 21 11:49:10 2019)

Going to 28.000000 -24.304290 70.000000 90.000000 53.000000
Run 2 started at Wed Aug 21 11:46:48 2019
Experiment: D:\Data\xs2212a\pre_xs2212a
Omega scan:   28.000 to   33.000 (    5 frames,   5.000s,   1.000deg) at t: -24.304,k:  70.000,p:  90.000,dd:  53.000
Run 2 ended

EXPECTED FINISH TIME:  (10,15,end:Wed Aug 21 11:49:08 2019)

Going to 28.000000 24.616790 -70.000000 90.000000 53.000000
Run 3 started at Wed Aug 21 11:48:00 2019
Experiment: D:\Data\xs2212a\pre_xs2212a
Omega scan:   28.000 to   33.000 (    5 frames,   5.000s,   1.000deg) at t:  24.617,k: -70.000,p:  90.000,dd:  53.000
Run 3 ended

Camera settings: 
CCD
   chip name  "KAF-4320E"
   channels 4
   height 2088
   width 2096
   active area     height 2088
     width 2096
     x 0
     y 0
HW
   ang brd pressent 1
   ang config loaded
   dsp firmware ok 1
   fpga firmware ok 1
   temperature ready 1
   ang brd type 1
MISC
   expander 221
   free space 206172
PICTURE
   param
     autoupload 1
     correction raw
     format raw
     ref type median
     analog channel 1
     binning 2
     originx 18
     originy 18
   state ref0 1487
   state ref1 1076
   state ref2 1194
   state ref3 1409
VOLTAGES
   dac_ref1 75 mV
   dac_ref2 94 mV
   dac_ref3 100 mV
   dac_ref4 87 mV
   h1 amplitude 10000 mV
   h1 offset 0 mV
   h1l amplitude 10000 mV
   h1l amplitude -3000 mV
   h2 amplitude 10000 mV
   h2 offset -3000 mV
   reset amplitude 12000 mV
   reset offset 2000 mV
   v1 amplitude 8000 mV
   v1 offset -8000 mV
   v2 amplitude 8000 mV
   v2 offset -8000 mV
TIMINGS 1X1
   adc sample delay -80 ns
   adc sample width 40 ns
   amp time off 4000 ms
   amp time on 3000 ms
   h setup time 50000 ns
   h first 60 ns
   h last 0 ns
   h width 600 ns
   reset delay 0 ns
   reset width 80 ns
   sh delay -280 ns
   sh width 220 ns
   v1 middle width 40000 ns
   v1 negative width 40000 ns
   v1 positive width 40000 ns
   v2 delay 40000 ns
   v2 negative width 40000 ns
   v2 pulse width 40000 ns
TIMINGS 2X2
   adc sample delay -80 ns
   adc sample width 40 ns
   amp time off 4000 ms
   amp time on 3000 ms
   h setup time 50000 ns
   h first 320 ns
   h last 220 ns
   h width 180 ns
   reset delay 0 ns
   reset width 80 ns
   sh delay -280 ns
   sh width 220 ns
   v1 middle width 40000 ns
   v1 negative width 40000 ns
   v1 positive width 40000 ns
   v2 delay 40000 ns
   v2 negative width 40000 ns
   v2 pulse width 40000 ns
TIMINGS 4X4
   adc sample delay -80 ns
   adc sample width 40 ns
   amp time off 4000 ms
   amp time on 3000 ms
   h setup time 50000 ns
   h first 300 ns
   h last 220 ns
   h width 180 ns
   reset delay 0 ns
   reset width 80 ns
   sh delay -280 ns
   sh width 220 ns
   v1 middle width 40000 ns
   v1 negative width 40000 ns
   v1 positive width 40000 ns
   v2 delay 40000 ns
   v2 negative width 40000 ns
   v2 pulse width 40000 ns

Network connection information (Wed Aug 21 11:48:57 2019)
Connected to ROOT\CIMV2 WMI namespace
Adapter : Intel(R) PRO/1000 PL Network Connection
  Speed:     100000000
  MaxSpeed:  100000000
  MACAddress:00:D0:C9:C4:15:16
  Status:    00:D0:C9:C4:15:16
Adapter : Intel(R) 82566DM-2 Gigabit Network Connection
  Speed:     100000000
  MaxSpeed:  100000000
  MACAddress:00:D0:C9:C4:15:15
  Status:    00:D0:C9:C4:15:15
Adapter : Intel(R) PRO/1000 GT Desktop Adapter
  Speed:     1000000000
  MaxSpeed:  1000000000
  MACAddress:90:E2:BA:06:D2:84
  Status:    90:E2:BA:06:D2:84
Data collection successfully finished at Wed Aug 21 11:48:57 2019
DC3DEVICES DEVICE INFO: Shutting down log devices...
DC3DEVICES DEVICE INFO: Shutting down Peltier device (CCSCAM) ...
CCSCAM device connection shutdown OK (pUnLockAndShutdownDC3DEVICES).
DC3DEVICES DEVICE INFO: Stopped Peltier device (CCSCAM) ...
DC3DEVICES DEVICE INFO: Shutting down Dual chiller device (DualChiller) ...
Dualchiller device connection shutdown OK (pUnLockAndShutdownDC3DEVICES).
DC3DEVICES DEVICE INFO: Stopped Dual chiller device (DualChiller) ...
DC3 INFO: Waiting for end of pre-experiment analysis...
Reading tabbin file: "D:\Data\xs2212a\pre_xs2212a_peakhunt"
   UB - matrix:
       0.087271   -0.045830    0.019137   (  0.000127    0.000100    0.000207 )
       0.065981    0.091690    0.025911   (  0.000145    0.000115    0.000237 )
       0.044418    0.058869    0.132122   (  0.000104    0.000082    0.000170 )
   M - matrix:
       0.013943    0.004665    0.009248   (  0.000031    0.000020    0.000029 )
       0.004665    0.013973    0.009277   (  0.000020    0.000025    0.000028 )
       0.009248    0.009277    0.018494   (  0.000029    0.000028    0.000047 )
UB fit with 42 obs out of 44 (total:44,skipped:0) (95.45%)
    unit cell:
        7.348(11)   7.347(12)  7.363(12)       
      119.94(18)  119.85(16)  90.16(12)  
      V = 281.6(7) 

Process information (Wed Aug 21 11:50:50 2019)
ID: 3668; threads 34; handles 791; mem 512124.00 (1187348.00)kB; time: 1w 4d 22h 1m 38s

MEMORY INFO: Memory PF:75.0, Ph:542.0, V:1159.0; pDataCollectionHParentDistConcurrentDC3 25
MEMORY INFO: Process info - Handles: 792, Memory: PF:500.1,peak PF: 700.2, WS: 468.7, peak WS: 637.0
MEMORY INFO: CCD G:2.4,H:33.2 (#1004),V:133.4 (#26)
MEMORY INFO: Tracker: CCD 131.3 (#6)
MEMORY INFO: Image pool: CCD 25.7/276.0 (#10, page size: 4096)
 
CCD PAR INFO: Correction kept - Dark subtraction: on; Flood correction: on (in CCD)
DC PRE ACTION: before iFinalDCPREPREXP
DC INFO: Custom DC settings (binning: 4x4, correlation:ON)