Your current setup file is: D:\Data\xs1715a\xs1715a.par Goniometer type: KM4 (km4gonio.xdll) Your current setup file is: D:\Data\xs1715a\xs1715a.par WINDOWS INFORMATION: (39.29c (release 19-06-2017)) System version:Windows7,Service Pack 1 (Build 7601) Screen resolution:1600x1200; Fonts: 120; Color: 32 bits Switching to new KM4 collision model (Atlas (SuperNova, Dual, Cu at home/near, Mo active, extended big cabinet), rail: Extended,1.1.20.)... Collision model: SuperNova (Dual, Cu at home/near), CCS camera Atlas, Large cabinet extended access, Extended rail, Beamstop gemini Mo CAMCCS CCD INTERFACE ************************************************** WARNING: ************************************************** StructureExplorer program is not installed in the system or is not associated with current version of CryslisPro Install the StructureExplorer program (minimum version 2.2.0) and associate with the CryslisPro by choosing directory path for StructureExplorer in RED Program Options in Programs tab. ************************************************************************************************************** ***************************************************************************************************************************** Shelxt makes Autochem more performant and enables the 'What is this?' tool. For more information look in help file. ***************************************************************************************************************************** Reading tabbin file: "D:\Data\xs1715a\xs1715a_peakhunt" No constraint UB - matrix: -0.007439 0.076674 -0.034798 ( 0.000009 0.000009 0.000009 ) -0.083383 -0.011775 -0.008049 ( 0.000007 0.000007 0.000007 ) -0.012196 0.033603 0.076835 ( 0.000008 0.000008 0.000008 ) M - matrix: 0.007157 0.000002 -0.000007 ( 0.000001 0.000001 0.000001 ) 0.000002 0.007147 0.000009 ( 0.000001 0.000002 0.000001 ) -0.000007 0.000009 0.007179 ( 0.000001 0.000001 0.000001 ) Constraint UB - matrix: -0.007439 0.076674 -0.034798 ( 0.000009 0.000009 0.000009 ) -0.083383 -0.011775 -0.008049 ( 0.000007 0.000007 0.000007 ) -0.012196 0.033603 0.076835 ( 0.000008 0.000008 0.000008 ) M - matrix: 0.007159 0.000000 0.000000 ( 0.000000 0.000000 0.000000 ) 0.000000 0.007159 0.000000 ( 0.000000 0.000000 0.000000 ) 0.000000 0.000000 0.007159 ( 0.000000 0.000000 0.000000 ) UB fit with 4037 obs out of 4381 (total:4381,skipped:0) (92.15%) unit cell: 8.3844(7) 8.3903(9) 8.3712(8) 90.069(8) 89.943(8) 90.013(8) V = 588.89(10) unit cell: 8.3820(3) 8.3820(3) 8.3820(3) 90.0 90.0 90.0 V = 588.89(3) WD P/CAL INFO: D:\Data\xs1715a\xs1715a_cracker.par written Instrument model: dd: 52.97, x0: 1027.95, y0: 1024.61, beam: 0.04, o0: 0.06, t0: -0.14, k0: -0.13 CRYSALIS INFO: No changes in tabbin file! Automatic save skipped (pWriteKM4PeakTableAndPrintTABBIN)! DC UNWARP INFO: 6 line(s) successfully appended! * * * CRYSALIS UNWARP * * * Unwarping started at Wed Mar 28 15:53:44 2018 UNWARP INFO: Start of layer extraction Layer 1: O: 0.000 0.000 0.000; L1: 1.000 0.000 0.000; L2: 0.000 1.000 0.000 UNWARP INFO: run 1 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=-30.935 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=91, end=100, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=101, end=110, - Adjusted required frames (end): #=10, start=100, end=109, UNWARP INFO: run 2 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=-30.935 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=91, end=100, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=101, end=110, - Adjusted required frames (end): #=10, start=100, end=109, UNWARP INFO: run 3 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=91, end=100, UNWARP INFO: run 4 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=91, end=100, UNWARP INFO: run 5 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=91, end=100, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=101, end=110, - Adjusted required frames (end): #=10, start=100, end=109, UNWARP INFO: run 6 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=91, end=100, UNWARP INFO: run 7 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=91, end=100, - Adjusted required frames (end): #=10, start=85, end=94, UNWARP INFO: run 8 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=91, end=100, Layer 1: O: 0.000 0.000 0.000; L1: 1.000 0.000 0.000; L2: 0.000 1.000 0.000 File: D:\Data\xs1715a\unwarp\xs1715a_hk0.img UNWARP INFO: Start of layer extraction Layer 2: O: 0.000 0.000 1.000; L1: 1.000 0.000 0.000; L2: 0.000 1.000 0.000 UNWARP INFO: run 1 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=-30.935 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=91, end=100, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=101, end=110, - Adjusted required frames (end): #=10, start=100, end=109, UNWARP INFO: run 2 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=-30.935 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=91, end=100, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=101, end=110, - Adjusted required frames (end): #=10, start=100, end=109, UNWARP INFO: run 3 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=91, end=100, UNWARP INFO: run 4 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=91, end=100, UNWARP INFO: run 5 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=91, end=100, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=101, end=110, - Adjusted required frames (end): #=10, start=100, end=109, UNWARP INFO: run 6 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=91, end=100, UNWARP INFO: run 7 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=91, end=100, - Adjusted required frames (end): #=10, start=85, end=94, UNWARP INFO: run 8 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=91, end=100, Layer 2: O: 0.000 0.000 1.000; L1: 1.000 0.000 0.000; L2: 0.000 1.000 0.000 File: D:\Data\xs1715a\unwarp\xs1715a_hk1.img UNWARP INFO: Start of layer extraction Layer 3: O: 0.000 0.000 0.000; L1: 1.000 0.000 0.000; L2: 0.000 0.000 1.000 UNWARP INFO: run 1 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=-30.935 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=91, end=100, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=101, end=110, - Adjusted required frames (end): #=10, start=100, end=109, UNWARP INFO: run 2 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=-30.935 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=91, end=100, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=101, end=110, - Adjusted required frames (end): #=10, start=100, end=109, UNWARP INFO: run 3 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=91, end=100, UNWARP INFO: run 4 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=91, end=100, UNWARP INFO: run 5 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=91, end=100, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=101, end=110, - Adjusted required frames (end): #=10, start=100, end=109, UNWARP INFO: run 6 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=91, end=100, UNWARP INFO: run 7 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=91, end=100, - Adjusted required frames (end): #=10, start=85, end=94, UNWARP INFO: run 8 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=91, end=100, Layer 3: O: 0.000 0.000 0.000; L1: 1.000 0.000 0.000; L2: 0.000 0.000 1.000 File: D:\Data\xs1715a\unwarp\xs1715a_h0l.img UNWARP INFO: Start of layer extraction Layer 4: O: 0.000 1.000 0.000; L1: 1.000 0.000 0.000; L2: 0.000 0.000 1.000 UNWARP INFO: run 1 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=-30.935 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=101, end=110, - Adjusted required frames (end): #=10, start=100, end=109, UNWARP INFO: run 2 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=-30.935 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=81, end=90, UNWARP INFO: run 3 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=91, end=100, UNWARP INFO: run 4 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=91, end=100, UNWARP INFO: run 5 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=91, end=100, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=101, end=110, - Adjusted required frames (end): #=10, start=100, end=109, UNWARP INFO: run 6 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=91, end=100, UNWARP INFO: run 7 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=91, end=100, - Adjusted required frames (end): #=10, start=85, end=94, UNWARP INFO: run 8 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=91, end=100, Layer 4: O: 0.000 1.000 0.000; L1: 1.000 0.000 0.000; L2: 0.000 0.000 1.000 File: D:\Data\xs1715a\unwarp\xs1715a_h1l.img UNWARP INFO: Start of layer extraction Layer 5: O: 0.000 0.000 0.000; L1: 0.000 1.000 0.000; L2: 0.000 0.000 1.000 UNWARP INFO: run 1 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=-30.935 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=91, end=100, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=101, end=110, - Adjusted required frames (end): #=10, start=100, end=109, UNWARP INFO: run 2 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=-30.935 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=91, end=100, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=101, end=110, - Adjusted required frames (end): #=10, start=100, end=109, UNWARP INFO: run 3 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=91, end=100, UNWARP INFO: run 4 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=91, end=100, UNWARP INFO: run 5 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=91, end=100, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=101, end=110, - Adjusted required frames (end): #=10, start=100, end=109, UNWARP INFO: run 6 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=91, end=100, UNWARP INFO: run 7 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=91, end=100, - Adjusted required frames (end): #=10, start=85, end=94, UNWARP INFO: run 8 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=91, end=100, Layer 5: O: 0.000 0.000 0.000; L1: 0.000 1.000 0.000; L2: 0.000 0.000 1.000 File: D:\Data\xs1715a\unwarp\xs1715a_0kl.img UNWARP INFO: Start of layer extraction Layer 6: O: 1.000 0.000 0.000; L1: 0.000 1.000 0.000; L2: 0.000 0.000 1.000 UNWARP INFO: run 1 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=-30.935 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=91, end=100, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=101, end=110, - Adjusted required frames (end): #=10, start=100, end=109, UNWARP INFO: run 2 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=-30.935 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=91, end=100, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=101, end=110, - Adjusted required frames (end): #=10, start=100, end=109, UNWARP INFO: run 3 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=91, end=100, UNWARP INFO: run 4 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=91, end=100, UNWARP INFO: run 5 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=91, end=100, BACKGROUND INFO: Ranges - Red run list: start=1, end=109, width=1.000 - Required frames: #=10, start=101, end=110, - Adjusted required frames (end): #=10, start=100, end=109, UNWARP INFO: run 6 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=91, end=100, UNWARP INFO: run 7 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=41, end=50, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=51, end=60, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=61, end=70, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=94, width=1.000 - Required frames: #=10, start=91, end=100, - Adjusted required frames (end): #=10, start=85, end=94, UNWARP INFO: run 8 started with pixels for extraction CCD reject setup (a_101_260412.ccd): valid corners=4 polygons=0 CCD reject setup: Corner(s): (-1,-1),(-1,27),(27,-1); (-1,512),(27,512),(-1,485); (512,512),(512,485),(485,512); (512,-1),(485,-1),(512,27); Computing L P COS3 correction map at th=30.655 deg Attention: Incidence angle correction applied: 3.000 power of 1/cos(alpha) Incidence angle correction: min= 1.0000 max= 4.6215 BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=1, end=10, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=11, end=20, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=21, end=30, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=31, end=40, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=71, end=80, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=81, end=90, BACKGROUND INFO: Ranges - Red run list: start=1, end=100, width=1.000 - Required frames: #=10, start=91, end=100, Layer 6: O: 1.000 0.000 0.000; L1: 0.000 1.000 0.000; L2: 0.000 0.000 1.000 File: D:\Data\xs1715a\unwarp\xs1715a_1kl.img Unwarping ended at Wed Mar 28 15:54:49 2018 System 'CLOSE MESSAGE' intercepted at Wed Mar 28 15:55:11 2018 WD P/CAL INFO: D:\Data\xs1715a\xs1715a_cracker.par written Instrument model: dd: 52.97, x0: 1027.95, y0: 1024.61, beam: 0.04, o0: 0.06, t0: -0.14, k0: -0.13 CRYSALIS INFO: No changes in tabbin file! Automatic save skipped (pWriteKM4PeakTableAndPrintTABBIN)!