DC3DEVICES: CCSCAM (Ver. 2.1.14.208) device OK (no locking) Camera settings: CCD chip name "KAF-4320E" channels 4 height 2088 width 2096 active area height 2088 width 2096 x 0 y 0 HW ang brd pressent 1 ang config loaded dsp firmware ok 1 fpga firmware ok 1 temperature ready 1 ang brd type 1 MISC expander 221 free space 206172 PICTURE param autoupload 1 correction raw format raw ref type median analog channel 1 binning 2 originx 18 originy 18 state ref0 1493 state ref1 1074 state ref2 1192 state ref3 1407 VOLTAGES dac_ref1 75 mV dac_ref2 94 mV dac_ref3 100 mV dac_ref4 87 mV h1 amplitude 10000 mV h1 offset 0 mV h1l amplitude 10000 mV h1l amplitude -3000 mV h2 amplitude 10000 mV h2 offset -3000 mV reset amplitude 12000 mV reset offset 2000 mV v1 amplitude 8000 mV v1 offset -8000 mV v2 amplitude 8000 mV v2 offset -8000 mV TIMINGS 1X1 adc sample delay -80 ns adc sample width 40 ns amp time off 4000 ms amp time on 3000 ms h setup time 50000 ns h first 60 ns h last 0 ns h width 600 ns reset delay 0 ns reset width 80 ns sh delay -280 ns sh width 220 ns v1 middle width 40000 ns v1 negative width 40000 ns v1 positive width 40000 ns v2 delay 40000 ns v2 negative width 40000 ns v2 pulse width 40000 ns TIMINGS 2X2 adc sample delay -80 ns adc sample width 40 ns amp time off 4000 ms amp time on 3000 ms h setup time 50000 ns h first 320 ns h last 220 ns h width 180 ns reset delay 0 ns reset width 80 ns sh delay -280 ns sh width 220 ns v1 middle width 40000 ns v1 negative width 40000 ns v1 positive width 40000 ns v2 delay 40000 ns v2 negative width 40000 ns v2 pulse width 40000 ns TIMINGS 4X4 adc sample delay -80 ns adc sample width 40 ns amp time off 4000 ms amp time on 3000 ms h setup time 50000 ns h first 300 ns h last 220 ns h width 180 ns reset delay 0 ns reset width 80 ns sh delay -280 ns sh width 220 ns v1 middle width 40000 ns v1 negative width 40000 ns v1 positive width 40000 ns v2 delay 40000 ns v2 negative width 40000 ns v2 pulse width 40000 ns System uptime: 3w 5d 23h 13m 29s Network connection information (Tue Mar 27 12:46:22 2018) Connected to ROOT\CIMV2 WMI namespace DC INFO: SuperN settings 50.00kV 0.80mA at Tue Mar 27 12:46:23 2018 Adapter : Intel(R) PRO/1000 PL Network Connection Speed: 1000000000 MaxSpeed: 1000000000 MACAddress:00:D0:C9:C4:15:16 Status: 00:D0:C9:C4:15:16 Adapter : Intel(R) 82566DM-2 Gigabit Network Connection Speed: 100000000 MaxSpeed: 100000000 MACAddress:00:D0:C9:C4:15:15 Status: 00:D0:C9:C4:15:15 Adapter : Intel(R) PRO/1000 GT Desktop Adapter Speed: 1000000000 MaxSpeed: 1000000000 MACAddress:90:E2:BA:06:D2:84 Status: 90:E2:BA:06:D2:84 EXPECTED FINISH TIME: (0,15,end:Tue Mar 27 12:48:59 2018) System uptime: 3w 5d 23h 13m 29s Going to 28.000000 -30.638681 70.000000 0.000000 53.000000 Run 1 started at Tue Mar 27 12:46:23 2018 Experiment: D:\Data\xs1714a\pre_xs1714a Omega scan: 28.000 to 33.000 ( 5 frames, 3.000s, 1.000deg) at t: -30.639,k: 70.000,p: 0.000,dd: 53.000 DC3DEVICES: Dualchiller (Ver. 2.5.3.34 - Final_Rev772_PCB7) device OK (no locking) DC INFO: Cryojet settings 293.0K 28.600% 13.700% at Tue Mar 27 12:46:24 2018 Run 1 ended EXPECTED FINISH TIME: (5,15,end:Tue Mar 27 12:48:48 2018) Going to 28.000000 -30.638681 70.000000 90.000000 53.000000 Run 2 started at Tue Mar 27 12:47:06 2018 Experiment: D:\Data\xs1714a\pre_xs1714a Omega scan: 28.000 to 33.000 ( 5 frames, 3.000s, 1.000deg) at t: -30.639,k: 70.000,p: 90.000,dd: 53.000 Run 2 ended EXPECTED FINISH TIME: (10,15,end:Tue Mar 27 12:48:46 2018) Going to 28.000000 30.794931 -70.000000 90.000000 53.000000 Run 3 started at Tue Mar 27 12:47:58 2018 Experiment: D:\Data\xs1714a\pre_xs1714a Omega scan: 28.000 to 33.000 ( 5 frames, 3.000s, 1.000deg) at t: 30.795,k: -70.000,p: 90.000,dd: 53.000 Run 3 ended Camera settings: CCD chip name "KAF-4320E" channels 4 height 2088 width 2096 active area height 2088 width 2096 x 0 y 0 HW ang brd pressent 1 ang config loaded dsp firmware ok 1 fpga firmware ok 1 temperature ready 1 ang brd type 1 MISC expander 221 free space 206172 PICTURE param autoupload 1 correction raw format raw ref type median analog channel 1 binning 2 originx 18 originy 18 state ref0 1494 state ref1 1075 state ref2 1194 state ref3 1407 VOLTAGES dac_ref1 75 mV dac_ref2 94 mV dac_ref3 100 mV dac_ref4 87 mV h1 amplitude 10000 mV h1 offset 0 mV h1l amplitude 10000 mV h1l amplitude -3000 mV h2 amplitude 10000 mV h2 offset -3000 mV reset amplitude 12000 mV reset offset 2000 mV v1 amplitude 8000 mV v1 offset -8000 mV v2 amplitude 8000 mV v2 offset -8000 mV TIMINGS 1X1 adc sample delay -80 ns adc sample width 40 ns amp time off 4000 ms amp time on 3000 ms h setup time 50000 ns h first 60 ns h last 0 ns h width 600 ns reset delay 0 ns reset width 80 ns sh delay -280 ns sh width 220 ns v1 middle width 40000 ns v1 negative width 40000 ns v1 positive width 40000 ns v2 delay 40000 ns v2 negative width 40000 ns v2 pulse width 40000 ns TIMINGS 2X2 adc sample delay -80 ns adc sample width 40 ns amp time off 4000 ms amp time on 3000 ms h setup time 50000 ns h first 320 ns h last 220 ns h width 180 ns reset delay 0 ns reset width 80 ns sh delay -280 ns sh width 220 ns v1 middle width 40000 ns v1 negative width 40000 ns v1 positive width 40000 ns v2 delay 40000 ns v2 negative width 40000 ns v2 pulse width 40000 ns TIMINGS 4X4 adc sample delay -80 ns adc sample width 40 ns amp time off 4000 ms amp time on 3000 ms h setup time 50000 ns h first 300 ns h last 220 ns h width 180 ns reset delay 0 ns reset width 80 ns sh delay -280 ns sh width 220 ns v1 middle width 40000 ns v1 negative width 40000 ns v1 positive width 40000 ns v2 delay 40000 ns v2 negative width 40000 ns v2 pulse width 40000 ns Network connection information (Tue Mar 27 12:48:34 2018) Connected to ROOT\CIMV2 WMI namespace Dualchiller device connection shutdown OK (pUnLockAndShutdownDC3DEVICES). CCSCAM device connection shutdown OK (pUnLockAndShutdownDC3DEVICES). Adapter : Intel(R) PRO/1000 PL Network Connection Speed: 1000000000 MaxSpeed: 1000000000 MACAddress:00:D0:C9:C4:15:16 Status: 00:D0:C9:C4:15:16 Adapter : Intel(R) 82566DM-2 Gigabit Network Connection Speed: 100000000 MaxSpeed: 100000000 MACAddress:00:D0:C9:C4:15:15 Status: 00:D0:C9:C4:15:15 Adapter : Intel(R) PRO/1000 GT Desktop Adapter Speed: 1000000000 MaxSpeed: 1000000000 MACAddress:90:E2:BA:06:D2:84 Status: 90:E2:BA:06:D2:84 Data collection successfully finished at Tue Mar 27 12:48:34 2018 Camera settings: CCD chip name "KAF-4320E" channels 4 height 2088 width 2096 active area height 2088 width 2096 x 0 y 0 HW ang brd pressent 1 ang config loaded dsp firmware ok 1 fpga firmware ok 1 temperature ready 1 ang brd type 1 MISC expander 221 free space 206172 PICTURE param autoupload 1 correction raw format raw ref type median analog channel 1 binning 2 originx 18 originy 18 state ref0 1494 state ref1 1075 state ref2 1194 state ref3 1407 VOLTAGES dac_ref1 75 mV dac_ref2 94 mV dac_ref3 100 mV dac_ref4 87 mV h1 amplitude 10000 mV h1 offset 0 mV h1l amplitude 10000 mV h1l amplitude -3000 mV h2 amplitude 10000 mV h2 offset -3000 mV reset amplitude 12000 mV reset offset 2000 mV v1 amplitude 8000 mV v1 offset -8000 mV v2 amplitude 8000 mV v2 offset -8000 mV TIMINGS 1X1 adc sample delay -80 ns adc sample width 40 ns amp time off 4000 ms amp time on 3000 ms h setup time 50000 ns h first 60 ns h last 0 ns h width 600 ns reset delay 0 ns reset width 80 ns sh delay -280 ns sh width 220 ns v1 middle width 40000 ns v1 negative width 40000 ns v1 positive width 40000 ns v2 delay 40000 ns v2 negative width 40000 ns v2 pulse width 40000 ns TIMINGS 2X2 adc sample delay -80 ns adc sample width 40 ns amp time off 4000 ms amp time on 3000 ms h setup time 50000 ns h first 320 ns h last 220 ns h width 180 ns reset delay 0 ns reset width 80 ns sh delay -280 ns sh width 220 ns v1 middle width 40000 ns v1 negative width 40000 ns v1 positive width 40000 ns v2 delay 40000 ns v2 negative width 40000 ns v2 pulse width 40000 ns TIMINGS 4X4 adc sample delay -80 ns adc sample width 40 ns amp time off 4000 ms amp time on 3000 ms h setup time 50000 ns h first 300 ns h last 220 ns h width 180 ns reset delay 0 ns reset width 80 ns sh delay -280 ns sh width 220 ns v1 middle width 40000 ns v1 negative width 40000 ns v1 positive width 40000 ns v2 delay 40000 ns v2 negative width 40000 ns v2 pulse width 40000 ns DC3DEVICES DEVICE INFO: Shutting down log devices... DC3 INFO: Waiting for end of pre-experiment analysis... Process information (Tue Mar 27 12:48:36 2018) ID: 2932; threads 34; handles 861; mem 512572.00 (1228672.00)kB; time: 1w 4d 21h 54m 6s MEMORY INFO: Memory PF:252.0, Ph:443.0, V:1199.0; pDataCollectionHParentDistConcurrentDC3 25 MEMORY INFO: Process info - Handles: 862, Memory: PF:500.6,peak PF: 697.1, WS: 300.1, peak WS: 556.7 MEMORY INFO: CCD G:2.5,H:33.2 (#1016),V:133.5 (#26) MEMORY INFO: Tracker: CCD 131.3 (#6) MEMORY INFO: Image pool: CCD 25.7/276.0 (#10, page size: 4096) CCD PAR INFO: Correction kept - Dark subtraction: on; Flood correction: on (in CCD) DC PRE ACTION: before iFinalDCPREPREXP Reading tabbin file: "D:\Data\xs1714a\pre_xs1714a_peakhunt" No constraint UB - matrix: -0.035219 0.000149 -0.077011 ( 0.000081 0.000078 0.000067 ) -0.056369 0.057561 0.025964 ( 0.000093 0.000090 0.000077 ) 0.052521 0.061788 -0.023992 ( 0.000111 0.000107 0.000091 ) M - matrix: 0.007176 -0.000005 -0.000011 ( 0.000017 0.000012 0.000010 ) -0.000005 0.007131 0.000001 ( 0.000012 0.000017 0.000010 ) -0.000011 0.000001 0.007180 ( 0.000010 0.000010 0.000012 ) Constraint UB - matrix: -0.035219 0.000149 -0.077011 ( 0.000081 0.000078 0.000067 ) -0.056369 0.057561 0.025964 ( 0.000093 0.000090 0.000077 ) 0.052521 0.061788 -0.023992 ( 0.000111 0.000107 0.000091 ) M - matrix: 0.007162 0.000000 0.000000 ( 0.000005 0.000000 0.000000 ) 0.000000 0.007162 0.000000 ( 0.000000 0.000005 0.000000 ) 0.000000 0.000000 0.007162 ( 0.000000 0.000000 0.000005 ) UB fit with 74 obs out of 102 (total:102,skipped:0) (72.55%) unit cell: 8.373(9) 8.399(10) 8.371(7) 90.01(8) 89.91(8) 89.96(9) V = 589(1) unit cell: 8.381(3) 8.381(3) 8.381(3) 90.0 90.0 90.0 V = 588.7(3) CCD PAR INFO: Mode kept - Atlas 4x4 binning 512x512 pixels gt a 0 20 25 0 55 REFERENCE MODEL INFO: New distance=55.00; x=1028.28; y=1027.51; d1=0.746; d2=-0.076; t0=-0.148 abs pilot IOBOX READ: light in cabinet=0, light on sample=0 IOBOX: IObox device initialized 2.3.4.86 Final_Rev746_PCB2v2(Tue Mar 27 12:49:36 2018)... IOBOX: IObox device locked OK. (Tue Mar 27 12:49:36 2018) IOBOX READ: light in cabinet=0, light on sample=0 IOBOX: switching on the light on sample IOBOX: IObox device unlock OK (Tue Mar 27 12:49:36 2018) IOBOX: IObox connection device shutdown OK (Tue Mar 27 12:49:37 2018) BT878: bits: 24/24 width: 720/720 height: 576/576 filter:Advantech Bt878 Capture ABS INFO: biBitCount=24 Video thread started PILOT INFO: Going to -57.0 -30.0 134.0 14.0 98.6 GOING (From -> To) [deg]: 0.000000 20.000000 25.000000 0.000000 55.000000 -> -57.000000 -30.000000 134.000000 14.000000 98.575703 ABS: width: 720/720; height: 576/576; bits: 24/24 ABS: OK REFERENCE MODEL INFO: New distance=98.58; x=1028.28; y=1027.51; d1=0.746; d2=-0.076; t0=-0.188 PILOT INFO: Going to -57.0 -30.0 134.0 104.0 98.6 GOING (From -> To) [deg]: -57.000000 -30.000000 134.000000 14.000000 98.575703 -> -57.000000 -30.000000 134.000000 104.000000 98.575703 PILOT INFO: Going to -57.0 -30.0 134.0 14.0 98.6 GOING (From -> To) [deg]: -57.000000 -30.000000 134.000000 104.000000 98.575703 -> -57.000000 -30.000000 134.000000 14.000000 98.575703 PILOT INFO: Going to -57.0 -30.0 134.0 104.0 98.6 GOING (From -> To) [deg]: -57.000000 -30.000000 134.000000 14.000000 98.575703 -> -57.000000 -30.000000 134.000000 104.000000 98.575703 PILOT INFO: Going to -57.0 -30.0 134.0 14.0 98.6 GOING (From -> To) [deg]: -57.000000 -30.000000 134.000000 104.000000 98.575703 -> -57.000000 -30.000000 134.000000 14.000000 98.575703 GOING (From -> To) [deg]: -57.000000 -30.000000 134.000000 14.000000 98.575703 -> 0.000000 20.000000 25.000000 0.000000 55.000000 REFERENCE MODEL INFO: New distance=55.00; x=1028.28; y=1027.51; d1=0.746; d2=-0.076; t0=-0.148 Video thread finished IOBOX READ: light in cabinet=0, light on sample=0 IOBOX: IObox device initialized 2.3.4.86 Final_Rev746_PCB2v2(Tue Mar 27 12:51:31 2018)... IOBOX: IObox device locked OK. (Tue Mar 27 12:51:31 2018) IOBOX READ: light in cabinet=0, light on sample=0 IOBOX: IObox device unlock OK (Tue Mar 27 12:51:31 2018) IOBOX: IObox connection device shutdown OK (Tue Mar 27 12:51:32 2018) sm i 1 - Proper dark current map loaded from file 1.00 sec DYNAMIC FLOOD INFO: Reloading infinity flood C:\Xcalibur\corrections\a_101\floodmo_a_101_calib_110512.ffiinffit DYNAMIC FLOOD INFO: Application of incidence correction with the following parameters: DYNAMIC FLOOD INFO: Poly5: 1.000E+000 0.000E+000 5.400E-005 0.000E+000 0.000E+000 dist=55.000 offset=0.000 x= 1026 y= 1034 Incidence correction min=0.87165 max=1.00000 PRO INFO: start new pre-experiment DC PRE ACTION: Enter DC PRE ACTION: Call PreExperiment Dialog (Init) ODBENCH SUPERN INFO: Open client 3 users RAMP: SuperNova device initialized (Ver. 2.7.0.0 - Final_Rev786_PCB2) (Tue Mar 27 12:51:44 2018)... DC PRE ACTION: Init dialog Collision check at 52.0mm Collision test: OK DC PRE ACTION: New experiment name: exp_1120 Collision check at 53.0mm Collision test: OK DC PRE ACTION: End init dialog DC PRE ACTION: Screening link was pressed. Collision check at 53.0mm Collision test: OK DC PRE ACTION: Experiment options link was pressed. Collision check at 53.0mm Collision test: OK RAMP: SuperNova device locked OK. (Tue Mar 27 12:51:44 2018) SuperNova device ramping to: kV=50.00,mA=0.80,ON DC PRE ACTION: New experiment name: x DC PRE ACTION: New experiment name: xs DC PRE ACTION: New experiment name: xs1 DC PRE ACTION: New experiment name: xs17 DC PRE ACTION: New experiment name: xs171 DC PRE ACTION: New experiment name: xs1714 DC PRE ACTION: New experiment name: xs1714a ODBENCH SUPERN INFO: Mo lamp active in ramping! DC PRE ACTION: Button CLEAR PATH was pressed DELETE INFO (RECYCLING BIN): Deleting files in root directory... (D:\Data\xs1714a\x*.*) DELETE INFO (RECYCLING BIN): Deleting files in root directory... (D:\Data\xs1714a\*.geo) DELETE INFO (RECYCLING BIN): Deleting files in root directory... (D:\Data\xs1714a\*.ccd) DELETE INFO (RECYCLING BIN): Deleting files in tmp directory... (D:\Data\xs1714a\tmp\*.*) DELETE INFO (RECYCLING BIN): Deleting files in frames directory... (D:\Data\xs1714a\frames\*.*) DELETE INFO (RECYCLING BIN): Deleting files in root directory... (D:\Data\xs1714a\pre_*.*) DELETE INFO: Deleting files in log directory... (D:\Data\xs1714a\log\*.txt) DELETE INFO (RECYCLING BIN): Deleting files in dc plots directory... (D:\Data\xs1714a\plots_dc\*.dat) DELETE INFO (RECYCLING BIN): Deleting files in exp info directory... (D:\Data\xs1714a\expinfo\*.ini) DELETE INFO (RECYCLING BIN): Deleting files in red plots directory... (D:\Data\xs1714a\plots_red\*.dat) DELETE INFO (RECYCLING BIN): Deleting run file in root directory... (D:\Data\xs1714a\xs1714a.run) DELETE INFO (RECYCLING BIN): Deleting par file in root directory... (D:\Data\xs1714a\xs1714a.par) DELETE INFO (RECYCLING BIN): Deleting sum file in root directory... (D:\Data\xs1714a\*.sum) DELETE INFO (RECYCLING BIN): Deleting bup file in root directory... (D:\Data\xs1714a\*.bup) DELETE INFO (RECYCLING BIN): Deleting bup file in bup subdirectory... (D:\Data\xs1714a\bup\*.bup) DELETE INFO (RECYCLING BIN): Deleting flood file in root directory... (D:\Data\xs1714a\*.ff*) DELETE INFO (RECYCLING BIN): Deleting files in root directory... (D:\Data\xs1714a\scr_*.*) DELETE INFO (RECYCLING BIN): Deleting bup file in root directory... (D:\Data\xs1714a\*.runbup) DELETE INFO (RECYCLING BIN): Deleting bup file in root directory... (D:\Data\xs1714a\*.hklauto) DELETE INFO (RECYCLING BIN): Deleting bup file in root directory... (D:\Data\xs1714a\*.tabbin) DC PRE ACTION: Configure PreExperiment manually was pressed. DC PRE ACTION: Experiment options link was pressed. Collision check at 53.0mm Collision test: OK Collision check at 53.0mm Collision test: OK Collision check at 53.0mm Collision test: OK Collision check at 53.0mm Collision test: OK Collision check at 53.0mm Collision test: OK SuperNova device write OK: kV=50.00,mA=0.80,ON RAMP: SuperNova device unlock OK (Tue Mar 27 12:51:53 2018) ODBENCH SUPERN INFO: Close client (others active) RAMP: SuperNova device connection shutdown OK. GUI is still active. (Tue Mar 27 12:51:53 2018) Collision check at 53.0mm Collision test: OK Collision check at 53.0mm Collision test: OK Collision check at 53.0mm Collision test: OK Collision check at 53.0mm Collision test: OK DC PRE ACTION: START button was pressed Collision check at 53.0mm Collision test: OK DC PRE INFO: Experiment D:\Data\xs1714a\pre_xs1714a.run DC PRE INFO: Expected chemical formula DC PRE INFO: Interactive strategy after pre-experiment: 1 DC PRE INFO: Set total time: 0, time= 15.0000 hrs DC PRE INFO: Strategy mode: Complete data, Redundancy 5.0000, Coverage limit 1.0000, Completeness limit 1.0000 DC PRE INFO: Experiment type laue_symmetry DC PRE INFO: User resolution 0.650 DC PRE INFO: Set target I/sig: 1, Target I/sig= 15.0000 DC PRE INFO: Record movie during dc: 1 DC PRE INFO: Movie step 6 deg DC PRE INFO: Detector distance mm= 53.0000 DC PRE INFO: D_min type: resolution DC PRE INFO: Is Protein: 0 DC PRE INFO: Is Noncentrosymmetric Or Chiral: 0 DC PRE ACTION: done ok end DC PRE ACTION: pCleanupPREEXP3 start DC PRE ACTION: pCleanupPREEXP3 end DC PRE ACTION: PreExperiment Dialog was closed, Return value: 1 DC PRE ACTION: Set current directory to: D:\Data\xs1714a DC PRE ACTION: Experiment file name: xs1714a DC PRE ACTION: Write run list DC PRE ACTION: Send message: WM_ODM_PRO_STARTSTATE DC PRE ACTION: Experiment detector distance: 53.00 DC PRE ACTION: pcleandatapreexp3 finally block started DC PRE ACTION: pcleandatapreexp3 finally block ended DC PRE ACTION: before iStartPreexperimentPREEXP DC PRE ACTION: enter istartpreexperimentpreexp DC S "D:\Data\xs1714a\pre_xs1714a" DC PRE ACTION: after WM_ODM_PRO_PROCCD_CHANGES_DATACOLLECTIONSETUP ODBENCH SUPERN INFO: Open client 3 users ODBENCH SUPERN INFO: Close client (others active) Collision check at 53.0mm ODBENCH SUPERN INFO: Open client 3 users Collision test: OK - Proper dark current map loaded from file 3.00 sec DC S INFO: User selected DC with skipped correlation in remeasured frames! This may yield data with spikes/zingers! DC S INFO: Return while readout used! DC S INFO: Write during acquire of next image used! DC S INFO: Check beamstop and Lorentz area used! System parameters: gain=90.0 (double-correlated-divide-by-2 gain) RAMP: SuperNova device initialized (Ver. 2.7.0.0 - Final_Rev786_PCB2) (Tue Mar 27 12:52:00 2018)... DC INFO: data collection with overflow remeasure off! DELETE INFO: Deleting experimental images... (D:\Data\xs1714a\frames\pre_xs1714a*.img) DELETE INFO: Deleting bgfiles in tmp directory... (D:\Data\xs1714a\tmp\pre_xs1714a*.*) Going to 28.000000 -24.304290 70.000000 0.000000 53.000000 RAMP: SuperNova device locked OK. (Tue Mar 27 12:52:01 2018) SuperNova device ramping to: kV=50.00,mA=0.80,ON ODBENCH SUPERN INFO: Mo lamp active in ramping! REFERENCE MODEL INFO: New distance=53.00; x=1028.28; y=1027.51; d1=0.746; d2=-0.076; t0=-0.148 WD P/CAL INFO: D:\Data\xs1714a\bup\pre_xs1714aTue-Mar-27-12-52-08-2018.bup written Instrument model: dd: 53.00, x0: 1028.28, y0: 1027.51, beam: -0.01, o0: 0.00, t0: -0.15, k0: -0.13 WD P/CAL INFO: D:\Data\xs1714a\pre_xs1714a.par written Instrument model: dd: 53.00, x0: 1028.28, y0: 1027.51, beam: -0.01, o0: 0.00, t0: -0.15, k0: -0.13 DC INFO: geo file saved: D:\Data\xs1714a\a_101_020512.geo DC INFO: ccd file saved: D:\Data\xs1714a\a_101_260412.ccd DC INFO: C:\Xcalibur\corrections\a_101\a_101_260412.ccd copied DC INFO: ffi file saved: D:\Data\xs1714a\floodmo_a_101_calib_110512.ffiinffit DC INFO: C:\Xcalibur\corrections\a_101\floodmo_a_101_calib_110512.ffiinffit copied DC R/S INFO: Preparing flood for detector distance 53.000mm DYNAMIC FLOOD INFO: Reloading infinity flood C:\Xcalibur\corrections\a_101\floodmo_a_101_calib_110512.ffiinffit DYNAMIC FLOOD INFO: Application of incidence correction with the following parameters: DYNAMIC FLOOD INFO: Poly5: 1.000E+000 0.000E+000 5.400E-005 0.000E+000 0.000E+000 dist=53.000 offset=0.000 x= 1026 y= 1034 Incidence correction min=0.86725 max=1.00000 DC R/S INFO: Flood for detector distance 53.000mm=53.000mm saved as D:\Data\xs1714a\53000_Tue-Mar-27-12-52-08-2018_floodmo_a_101_calib_110512.ffi DELETE INFO: Deleting data red ini... (D:\Data\xs1714a\expinfo\pre_xs1714a_datared.ini) DELETE INFO: Deleting crystal ini... (D:\Data\xs1714a\expinfo\pre_xs1714a_crystal.ini) DELETE INFO: Deleting auto ini... (D:\Data\xs1714a\expinfo\pre_xs1714a_auto.ini) DELETE INFO: Deleting rrp ini... (D:\Data\xs1714a\expinfo\pre_xs1714a_rrp.ini) DELETE INFO: Deleting data collection ini... (D:\Data\xs1714a\expinfo\pre_xs1714a_datacoll.ini) DC INFO: Dark trigger time: 120 mins (keep darks=1) Run list: D:\Data\xs1714a\pre_xs1714a Frames folder: D:\Data\xs1714a\frames